|
ILDVR application
software for H.264 hardware encoded DVR cards (PCI) Standalone NVR IP cameras |
|
Introduction ILDVR
uses one set of application software (server and live center) for multiple models
of PCI (PCI-Express) card, Standalone NVR, and IP cameras. The server software can automatically sense
the number of ILDVR cards on a computer system, therefore, when you put
additional ILDVR cards onto existing DVRs, there is
no need to re-install new software. The ILDVR
is very open to software feature suggestion. Within 3 years of development,
the software has been enhanced twice annually to its version 8. By now, its
software feature is very comprehensive, and in a few cases, leading the
industry. Users of ILDVR cards can
enjoy free software upgrade within the same hardware version. |
|
Software feature for
servers System
software · Multiple languages
available: English, French, Dutch, Russian, Turkish, German, · Your choice to store
video files onto multiple hard drives and RAID arrays, your assignment on
remaining hard drive space, and selection to over-write recorded video. · Supports very high
quality, “lip-sync” audio on every video channel, supports two-way audio:
remote sites can talk back to the server.
The video quality is close to DVR at D1, and is S-VHS like at CIF. · Supports E-map.
Camera/relay icons in your floor plan will blink on alarm. · Video can be set to
auto-pop up when alarm triggers. · Log files on system
alarms are available for local or remote analysis. · Supports remote log-in
via Web browser or dedicated IP, allows remote monitoring, instant playback,
remote search, remote control of DVR .. etc. via only
three IP ports. · Your selection on
re-boot schedule. Since these cards
use hardware encode, CPU usage is very low, e.g. 50 channels system uses 12%
CPU cycles of a P4 3GHz. This low CPU
usage reduces the need to re-boot windows. · Supports PTZ cameras
and input/output relays via serial (com) ports. · Supports NTSC and/or
PAL (both system cameras can co-exist on one PC). · Supports CIF (352x240
pixels) and D1 (708x480 pixels) resolutions. You can combine two CIF channels
to one D1. Screen
layout · Displays 1, 4,
9,13,16,20, 25, 28, 33, 36, 49, 64 video cameras. · Two GUIs of your
choice. You can easily customize the
screen with your company’s logo. · *** Provides instant, 8
minutes playback on any channels while monitoring. · *** Control PTZ cameras
on screen: make the PTZ camera follow your mouse. · *** Allows users to
program and store 10 different PTZ routes. · *** Full control of color,
brightness, contrast, and audio level for each channels.. Camera
setup software · Camera parameters can
be set individually, or in groups. · On-screen display
available, your choice of font size and position · Compression parameters: ·
*** Dual compression: Dual parameter assignments, one for local
recording and one for network transmission. ·
H264 with VBR (variable bit rate, lower down bit rate if there
are little pixel changes) or CBR (constant bit rate); from 30frames per
second (fps) to 1fps, NTSC and/or PAL. ·
Encoding rates can be set from 45MB – 360 MB/hr per camera at
352x240(288) pixels, or 90MB – 840MB/hr per camera at D1 704x480 (288). · Choice of on screen
camera identifier display location and size. · Cameras can be grouped
for ease of setting up parameters. · All channels can record
audio. · Pre and post alarm
available. · Recoding based on
scheduled constant recording, on motion detect, relay trigger, or both. · Supports Speed dome
(PTZ cameras) with presets, scanning and touring function. Alarm
and sensor setup · Controls multiple
modules of i/o controller, each has 16 input and 16
output relays. · On alarm, camera
display can automatically show up from minimized position. Auto
Backup and Motion Alarm · Backup any camera onto
a different hard drive for dual protection · link up speed domes
such that the camera will zoom to a preset position on alarm Email
Setup · Send E-mail to multiple
addresses with or without picture attachment. Password
control · Admin and user level,
having different rights for most feature of the DVR. Video
file search · Playback 1, 4, 9, 16
channels at the same time, pending on your hard drive speed. · Search by calendar
date, hour and minute. Multiple
playback speeds, from 1/16 times to 16 times.
Can enlarge video to full screen, or zoom out video to multiple
levels. · User can select video
clips to save onto a folder or archive into CD or DVD. · Can go to any ILDVR
servers (IP or DDNS based) to search for the recorded video database, using
same function as above. System
log list: · Auto record administrators
and operators command requests on the server. · Allows manual entry on
system log for follow up records. · System log list can be
search by date, by Mode: operation; alarm; prompt; all. |
|
Software feature for client
site, “ System
software · Multiple languages
available: English, French, German, Russian, Turkish, Chinese etc. We have API available
for the ease of adding languages onto the s/w. · Your choice to store
video files onto the client computer, subject to “operation rights”. · Supports very high
quality, “lip-sync” audio on all video channels, supports two-way audio: client sites can talk back to the selected
server. · Log files on system
alarms are available for analysis. · Can remotely control
PTZ cameras. · Supports NTSC and/or PAL
(both system cameras can co-exist on one PC). · Urgent record for all
channels and screen capture for selective screens. · Password control on
user function. · Supports IDLVR used H.264
hardware encoded appliances, such as ILDVR IP camera, PCI card based system, standalone
NVRs. Screen
layout · Displays up to 64 video servers
per page, 16 pages. You can have a mix
of card based DVR, IP cameras and standalone NVR as a server. · Two GUIs of your
choice. You can easily customize the
screen with your company’s logo. · *** Playback any video
channels while monitoring. · Full control of color,
brightness, contrast, and audio level for each channel. Local
and remote video file search · Playback up to 1, 4, 9,
16 channels at the same time, pending on the speed of your hard drive. · Search by calendar
date, hour and minute. Multiple
playback speeds, from 1/16 times to 16 times.
Can enlarge video to full screen, or zoom out video to multiple
levels. · User can select video
clips to save onto a folder or archive into CD or DVD. · Can go to any ILDVR
servers (IP or DDNS based) to search for the recorded video database, using
same function as above. System
log list: · Can search two types of
system log list: local (client) or remote servers. · System log list can be
search by date, by Mode: operation; alarm; prompt; all. Server
setup from remote · Can log onto any ILDVR
servers via IP or DDNS, password permitted, to re-configure the server. Remote
relay control ·
Remotely monitor and control relays of all connected
servers. This function facilitates control
on door locks, alarms, cameras, etc.
of different buildings. |